BarryMac
Libra
HDF Bronze Supporter
  
N. San Diego & Lake Martinez
Posts: 2,652
APPD 0.35
Post Rank: 24
'01 Carrera 202XR Squirter..
|
 |
Posted: Aug. 14 2006,11:55 am |
Post # 1 |
   |
8" Lift, Douglas Wheels with 26" Tires, Stretch Plastics front cowl, the rear seat was built from extruded aluminum, it can be removed in One minute by loosening two screws and pulling 4 detent pins, it makes the bed usable to haul out the trash and haul the larger coolers. The batteries are at about 80%, They will make it until next season easily, If I was to keep them I would replace sometime next Spring, needs paint, I've had quotes from a couple of Paint shops, if I pull the body parts they will spray it for about $300. I still have the roof and front windshield, they aren't on the cart currently. I have approximately $3300 into it, I'll let it go for $3000.
**Right after front Cowl was installed**
**Straight on shot of front end, note custom SS front bumper**
**2.5" LEDS for tailights**
**Douglas Wheels and 26" Tires**
**Custom Rear Seat, it is now padded and covered in the same material as the front seat**
**Almost finished**
RIVER! If you have to ask you wont understand...
|
7-22-2026 Three Word Post.....The Next Generation.... (Rep.#20,238) from: GoFastRacer
